Prof. Repair System 7003
SUNKKO 7003
Intelligent Programmable Digital Service Station
1) 852D+ Intelligent Programmable Rework Station
2) 863E Infrared Thermostat Preheater
3) 301 Omnipotent Work Platform
4) 933E Tweezers Soldering Station
== FEATURE ==
1) Unique total 50 flexible programs for different requirements and
one touch operation. An overall operation could be formed a
scientific reference.
2) Unique a 3 segments' temperature curve program achieves a stage
heating with good protection of BGA.
3) Unique joint start with 852D+ rework station and 863E Preheater
up and down heating at same step to protect PCB and BGA.
4) Unique calibration pen is used to check the temperature of hot
air produced and hot air on BGA surface.
5) Unique built-in BGA sucker is used to lift BGA from/on PCB to
meet BGA non-touch nature.
6) Intelligent control on auto sleep, auto awake, auto power off
and auto cooling for energy save, safe, long life and environment
protection.
7) With digital temperature setting, time setting, digital airflow
setting and airflow parameter display, the performance becomes more
efficiently and precisely.
8) Flexible start by handle or panel.
9) With up and down heating formed by 750W hot air handle on the
top and 1500W preheater under PCB to have overall and even heating
to avoid PCB deformation.
10) Preheater has large heating area 16x16cm. It is suitable for
special care PCB and large assembly parts with preheat and cooling
function.
11) Hands free control under assistance of 301 stand which holds
any size of PCB freely.
12) 933E tweezers is good for soldering tiny component in a high
density circuit board and does not affect the nearby components.
13) Fitting optional BGA nozzle ensures excellent performance and
efficiently.
14) Suitable for hi-tech electronics products such as mobile phone,
computer, MP3, etc.
== SUNKKO 852D+ ==
Max Power: 750W
Steady Power: 300W
Temperature: 100~600 oC
Air Control: 0.3~24 L/min
Time Control: 15~999 sec
Precision: BGA surface +/-3 oC
Heater: 700W Ceramic
Air Pump: 45W Diaphragm
Vacuum Power: >50 g
Dimension: 185(L)245(W)170(H) mm
Packing: 33.5x28x19 cm
Gross Weight: 5kg
== SUNKKO 863E ==
Max Power: 1500W
Temperature: 100~250 oC
Preheat Area: 16x16cm
Airflow: 32~45 L/min
Control Mode: MCU, PID
Heater: Quartz Infrared
Detector: K Thermocouple
Packing: 33.5x28x19 cm
Gross Weight: 3.7 kg
== SUNKKO 301 ==
Packing: 51x41x17 cm
Gross Weight: 13 kg
== SUNKKO 933E ==
Max Power: 60W
Voltage Output: 24V
Ground Resistance: <2
Ground Potential: <2mv
Heater: 50W Ceramic
Precision: +/-1 oC
Iron Temperature: 200~480 oC
Tweezers Temperature: 200~400 oC
Packing: 27x23.5x16 cm
Gross Weight: 3 kg
*Information maybe revised without prior notice.
**Friendly Note**
There is serious fake SUNKKO in China market. All buyers please
order SUNKKO via us (SUNKKO Producer) directly to make sure the
products are real and original SUNKKO quality, function and safety.
Factory - Foshan, China
Meilide Electronic Co. Limited
Factory Address: 6/F, Hengtong Building, Gangcai West Road, Xiaobu,
Lecong, Shunde, Foshan, Guangdong Province, China.
Tel: +86-757-28972123Fax: +86-757-28857818Website:
http://www.sunkko.com
Sales Office - Guangzhou, China
Dashing Telecom Instruments Facilities Office
Office Address: Room 1630, New Asia International Electronic &
Digital City, 55 XiDi Er Road, Guangzhou, China.
Tel/Fax: +86-020-22080631Email: sunkko888@163.com
Our Shop - Shenzhen, China
Dashing Facilities Instruments Shop
Shop Address: Shop C040, 3/F, Duhui 100 Electronic Centre,
Zhonghang Road, Futian, Shenzhen, Guangdong Province, China.
Tel: +86-0755-83013377
Head Office - Hong Kong, China
Dasing Technology Industrial Co. Limited
Email: dashing@sunkko.com
